Show simple item record

dc.contributor.authorDurduc, Costel
dc.contributor.authorGurău, Liviu
dc.contributor.authorDrugescu, Elena
dc.contributor.authorMușat, Viorica
dc.date.accessioned2018-05-30T12:39:30Z
dc.date.available2018-05-30T12:39:30Z
dc.date.issued2016
dc.identifier.urihttp://10.11.10.50/xmlui/handle/123456789/5145
dc.descriptionThe Annals of "Dunarea de Jos" University of Galati Fascicle IX Metallurgy and Materials Sciencero_RO
dc.description.abstractThe main purpose of this industrial experimental rolling, done in ArcelorMittal Galati in the Heavy Plate Mill is to check the correlation between mechanical properties and the microstructure of chemical compositions used in trial in order to reach through-thickness Z properties. First chemical composition is C_Mn steel with mechanical properties designed to reach at least 275 MPa on yield strength. The other chemical composition is based on Nb and Ti alloying elements with mechanical properties designed to be equal or higher than 360 MPa. In total, four slabs with 250 mm thickness were rolled. Two slabs with targeted plates thickness of 22.5 mm and 60 mm were used in trial per each chemical composition in order to check the thickness feasibility of targeted through-thickness Z properties.ro_RO
dc.language.isoenro_RO
dc.publisherUniversitatea "Dunărea de Jos" din Galațiro_RO
dc.subjecttrough-thicknessro_RO
dc.subjectZ25ro_RO
dc.subjectZ35ro_RO
dc.subjectstructural steelsro_RO
dc.subjectship structuresro_RO
dc.subjectoffshore structuresro_RO
dc.subjectbeams in bridge constructionsro_RO
dc.titleResearch in industrial trials to Improve Through-Thickness Z35 Properties of Hot Rolled Heavy plates up to 60 MM Thickness for Structural Steelsro_RO
dc.typeArticlero_RO


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record