Căutare după Subiect "sintering"

Afișează articolele 1-13 of 13

    • Dimensional Changes in Some Iron-Based Powder Metallurgy Alloys 

      Marin, Mihaela; Potecașu, Florentina; Potecașu, Octavian (Universitatea "Dunărea de Jos" din Galați, 2015)
      The purpose of this paper is to present the dimensional changes in some ironbased (P/M) alloys. The specimens produced from atomized iron powder and alloyed powder with different sizes (< 45, 45-63, 63-100, 100-150, >150 ...

    • Influence of Alloying Elements on Corrosion Resistance of Some Iron - based Sintered P/M Alloys 

      Potecașu, Florentina; Marin, Mihaela; Potecașu, Octavian; Radu, Tamara; Istrate, Gina (Universitatea "Dunărea de Jos" din Galați, 2015)
      In this paper is described the influence of alloying elements on corrosion behavior of sintered iron parts. The compacts were sintered at 1,150 °C and the sintering time was 60 minutes. After microstructural studies, the ...

    • Mechanical properties and Abrasive Wear Behavior of Fluidized-bed Carburized Sintered Iron Alloys 

      Marin, Mihaela; Potecașu, Florentina; Drugescu, Elena; Potecașu, Octavian; Alexandru, Petrică (Universitatea "Dunărea de Jos" din Galați, 2012)
      This paper is a study of the influence of fluidized bed carburizing of sintered steels on the mechanical properties and the abrasive wear behavior for two different types of powder. Carburizing was carried out at a ...

    • Microstructural Characteristics of Sintered Powder Metallurgy Alloys 

      Marin, Mihaela; Potecaşu, Florentina; Potecaşu, Octavian (Universitatea "Dunărea de Jos" din Galaţi, 2014)
      The purpose of this paper is to study the influence of processing parameters on the microstructural characteristics of sintered powder metallurgy alloys. The specimens were produced from atomised iron powders with different ...

    • Reasearches Regargindg the Influence of Steam Oxidation on Sintered Alloys Properties 

      Marin, Mihaela; Potecaşu, Florentina; Potecaşu, Octavian (Universitatea "Dunărea de Jos" din Galaţi, 2013)
      In this paper is studied the influence of steam treatment applied on sintered steels and the mechanical properties and abrasive wear behavior for two different types of powder. Steam treatment was carried out at temperature ...

    • Research Regarding the Possibility of Obtaining Nitinol by Powder Metallurgy 

      Potecaşu, Octavian; Potecaşu, Florentina; Alexandru, Petrică; Braz Fernandes, Francesco Manuel; Cordeiro Silva, Rui Jorge; Figueiredo Pereira Das Neves, Filipe Carlos (Universitatea "Dunărea de Jos" din Galaţi, 2012)
      In the paper the obtaining of nitinol by pressing and sintering of a mixture of nickel and titanium powders is presented. The fabrication of NiTi alloys by powder metallurgy allows avoiding the usual problems related to ...

    • Some Issues Concerning Gear Wheels Fabrication by Sintering 

      Olevschi, Alexandru (Universitatea "Dunărea de Jos" din Galați, 2006)
      Powder metallurgy appeared in the XVIII century as result of industrial market demand for electric bulbs filaments made of wolfram. Nowadays powder metallurgy is applied in such fields as: automotive industry (cylindrical ...

    • Some Issues Concerning Gear Wheels Fabrication by Sintering 

      Olevschi, Alexandru (Universitatea "Dunărea de Jos" din Galați, 2006)
      Powder metallurgy appeared in the XVIII century as result of industrial market demand for electric bulbs filaments made of wolfram. Nowadays powder metallurgy is applied in such fields as: automotive industry (cylindrical ...

    • Sources of Emissions in the Sintering and Blast Furnace Plant 

      Chiriac, Alexandru; Florea, Gheorghe; Saracin, Ioan; Panda, Olimpia (Universitatea "Dunărea de Jos" din Galați, 2010)
      The main technological operations for producing the sinter used for preparing the hot metal in the furnace are: preparation and transport of raw materials used for producing the sinter (transport, storage, crushing, ...

    • Studies Regarding the Influence of Carbon Content on the Tribological Behaviour of Gas-Carbu-Sintering Steels 

      Ghercioiu, Jeni; Nicolicescu, Claudiu; Ștefan, Iulian; Trotea, Mario (UDJG, 2011)
      The paper presents the experimental research on the tribological behavior of sintered steels obtained by carburizing the iron powder with different concentrations of graphite (Gr). For the experimental research were prepared ...

    • Study of the Sintering Process of Iron Powders Coated with Nano-Hydrocarbon and the Resulting Microstructure at Temperatures up to 1200°C 

      Georgiev, Jordan; Anestiev, Lubomir; Bendereva, Ekaterina; Lukarski, Yavor; Marcela, Selecka; Gavrilova, Rositsa (Universitatea "Dunărea de Jos" din Galați, 2009)
      The objective of the research is development and study of a new ecologically friendly and technologically advanced method for introduction of carbon during sintering of low alloyed iron powders ASC 100.29. The method is ...

    • The Influence of Steam Treatment on Mechanical Properties and Abrasive Wear Behavior of Sintered P/M Steels 

      Marin, Mihaela; Potecaşu, Florentina; Drugescu, Elena; Potecaşu, Octavian; Alexandru, Petrică (Universitatea "Dunărea de Jos" din Galaţi, 2012)
      In this paper is a study of the influence of steam treatment on sintered P/M steels, for three different types of powder. The abrasive wear of steam-treated sintered iron is analysed by abrasion tests. The specimens were ...

    • Wear Behavior of Carburizing on Powder Metallurgy Alloys 

      Marin, Mihaela; Potecașu, Florentina; Alexandru, Petrică; Potecașu, Octavian; Drugescu, Elena (Universitatea "Dunărea de Jos" din Galați, 2014)
      In this paper is studied the influence of wear behavior of carburizing in fluidized-bed on sintered alloys produced by powder metallurgy route. In powder metallurgy, carburization is a thermochemically treatment that ...