Căutare Scientific papers - Annals of "Dunarea de Jos" University of Galati - Analele științifice ale Universității "Dunărea de Jos" din Galați după Titlu
Afișează articolele 1680-1699 of 1845
-
The Influence of Speed Cooling on Some Properties of Laminated Steel
(Universitatea "Dunărea de Jos" din, 2016)This study presents a possibility to predict the connection between the cooling regime and the properties of steel. An important factor to enhance the properties of steel is the speed of the cooling regime. To be in ... -
The Influence of Steam Treatment on Mechanical Properties and Abrasive Wear Behavior of Sintered P/M Steels
(Universitatea "Dunărea de Jos" din Galaţi, 2012)In this paper is a study of the influence of steam treatment on sintered P/M steels, for three different types of powder. The abrasive wear of steam-treated sintered iron is analysed by abrasion tests. The specimens were ... -
The Influence of the Applied Load on the Friction Coefficient of the Sintered Iron-Base Bearings
(Universitatea ”Dunărea de Jos” din Galați, 2008)In the recent years the iron base sintered bearings production was considerable increased at the expense of the copper based ones, due to the low cost and availability of the iron powders as well as the higher strength. ... -
The Influence of the Carbon Content on the Depth of the Carbonitrurat Layer in Fluidized Layer for 1C15, 1C25 and 1C45 Steels
(Universitatea "Dunărea de Jos' din Galați, 2016)This paper presents the experimental research of carbonitriding thermochemical processing in fluidized layer performed on some samples of carbon steel with different carbon contents, the fluidized layer being made up of ... -
The Influence of the Hydraulic Fluid Compressibility on the Tematics of Mechanisms Actuated with Hydraulic Cylinders
(Universitatea "Dunărea de Jos" din Galați, 2015)the description of the kinematics of mechanisms driven by hydraulic cylinders, hydraulic agent is usually considered incompressible. This computing hypothesis introduces errors which, in certain situations, can not be ... -
The influence of the physical-Chemical Factors on the Distribution of Heavy Metals in the Delta Ecosystems
(Universitatea "Dunărea de Jos" din Galați, 2015)Recognized to the influence of micropollutants, heavy metals represented on the ecological status of surface waters, including delta ecosystems, the paper aims to study the impact of environmental factors (temperature, ... -
The influence of the Rolling track on the Dynamic Comportment of the equipement on tyres
(Universitatea "Dunărea de Jos" din Galați, 2005)The paper presents aspects connected to the comportment of the vehicle on wheels which moves on dislevement soil. A complete dynamic model is realized for a vehicle on wheels with tyres, which wheels are rigidly tied to ... -
The Influence of the Sintering Atmospheres on the Wear Behaviour of the Copper Based Alloys
(UDJG, 2010)The Powder Metallurgy (PM) technique allows manufacturing the sintered selflubricating materials having a high wear resistance. It is well known that the small and medium sized bearings are processed by PM with better ... -
The Influence of the Steel's Surface Quality on the Electroless Ni-P Coatings
(Universitatea "Dunărea de Jos" din Galaţi, 2015)The method of autocatalytic reduction coating assures a precise reproduction of the coated surface. This is an advantage when the support surface has a complex geometry but also becomes a disadvantage because it requires ... -
The Influence of the Thermomagnetic Treatments on the Hardness Number of Steels and the Superficial Layers Nitrided Durability
(Univeritatea "Dunărea de Jos" din Galați, 2005)Two types of steels subjected to a nitriding thermo-chemical treatment after thermomagnetic treatments. The structural aspects into superficial layer of these steels are studied during friction process by using of an ... -
The Influence of the Thermomagnetic Treatments on the Nitrided Superficial Layers Evolution after Wear Process (III)
(UDJG, 2011)Two types of steel grades were subjected to a nitriding thermo-chemical treatment after the thermo-magnetic treatments. The structural aspects of the superficial layers of these steels are studied after the friction process ... -
The Influence of Waste Composition on the Pumping System Corrosion
(Universitatea "Dunărea de Jos" din Galați, 2017)Wastewater piping systems in urban agglomerations or industrial areas have problems with the wear and tear of equipment and water transport pipelines used. The problems are related to hydromechanics wear and corrosion ... -
The juridical status of adoption by same-sex couples
(Universitatea ,,Dunărea de Jos" din Galați, 2008-01) -
The Laboratory Experiments Regarding the Intercritical Heat Treatments Applied an the Low-Alloyed Steel
(Universitatea "Dunărea de Jos' din Galați, 2006)The paper presents the research results regarding the influence of the intercritical thermal treatments carried out on some hypoeutectoid steel castings. The purpose of this research at the laboratory scale is to ... -
The Level of Confidence for a Ship Hull Girder
(Universitatea "Dunărea de Jos" din Galaţi, 2007)Structural estimation consists in a set of activities done to certificate security and reliability of an existing ship for its residual service life. Depending on ship’s type and damages, there are alternatively evaluation ... -
The Level of Noise Pollution in University Campuses Administered by the University of 1 December 1918 in Alba Iulia
(Universitatea "Dunărea de Jos" din Galați, 2018)Sound pollution is becoming a major problem because of multiplying sources of noise. In this study, I will present the results of the noise measurements carried out in the four campuses of the 1 Decembrie 1918 University ... -
The Management of Work Risk for a Plate Rolling mill Machine
(Universitatea "Dunărea de Jos" din Galați, 2013)Arcelor Mittal is the leader on important iron and steel global markets. This company has a performant system for research, for iron and steel plate production and has a top network for distribution, too. The company ... -
The Mechanical Low Frequency Signal Reconstruction by it's Spectral Components
(Universitatea "Dunărea de Jos" din Galați, 2007)This paper is a point of view of a new way of signal reconstruction through it’s spectral components. Sampling theory is analyzed from different perspectives, what means if for technical reasons the time can’t be sampled ... -
The Mechanism of Phase Transformation to Obtain Zinc-Iron Coatings
(Universitatea "Dunărea de Jos" din Galați, 2009)Important changes in the ratio of constitutive phases take place during heating of galvanized parts due to Zn coating layer changed into Zn-Fe alloy. The work deals with a mathematical correlation between diffusion ... -
The Method for Remote Control of a Mechatronic System, Based on a Bluetooth Module
(Universitatea "Dunărea de Jos" din Galați, 2015)The paper presents a mechatronic system programmed and controlled by a PLC. The mechanical structure consists of a Dc motor and pneumatic actuators. The Control from short distance is necessary in many industrial appl ...
