Căutare Fascicula IX după Titlu
Afișează articolele 410-429 of 552
-
Structural and Tribological Aspects on Ti(C,O,N) Magnetron Reactive Sputtered Thin-Films
(Universitatea "Dunărea de Jos" din Galați, 2007)Magnetron sputtering is a flexible technique and allows producing a significant amount of types of coatings. Within the frame of present work, Ti-C-O-N thin films were deposited onto high-speed steel (AISI M2), substrates ... -
Structural Changes Associated with the Pseudoelastic Response of Fe-based Shape Memory Alloys
(Universitatea "Dunărea de Jos" din Galați, 2014)The pseudoelastic responses of two types of iron base shape memory alloys (SMAs) were introduced and discussed. The former was based on Fe-Mn-Si system, obtained by classical (CM) and by powder metallurgy (PM) manufacturing. ... -
Structural Characteristics in Cobalt Based Alloys
(Universitatea "Dunărea de Jos" din Galaţi, 2008)In the present paper there are presented results of investigations on samples of partially removable denture made of cobalt base alloys (Co-Cr-Mo) regarding specific structural analysis: determination of structural phases ... -
Structuras of the Eutectoid Zn-Al Alloy Obtained by Directed Solidification
(Universitatea "Dunărea de Jos" din Galați, 2014)This work analyses the structure of the eutectoid Zn-Al based alloy directionally solidified, with cooling rates ranging between 8.5-0.4 oC/sec. During cooling, the temperature gradient in the liquidus zone, respectively ... -
Structure and Corrosive Firmness of Composition Materials on the Basis of Copper and Molybdenum got Method Electron-Beam TechnologyB
(Universitatea "Dunărea de Jos" din Galați, 2007) -
Structure Characterization of Ca/Ba, Ca-FeSi Inoculated, Low Sulphur, Electrically Melted, thin Wall Grey Iron Castings
(Universitatea "Dunărea de Jos" din Galaţi, 2013)Much of the base iron in grey iron foundries is electrically melted in an acid lined induction furnace. The performance of the induction furnace allows superheating above 1500 oC, which is appropriate for thin wall casting ... -
Structure Effects Over Behavior of Graphite Gray Iron in Running
(Universitatea "Dunărea de Jos" din Galați, 2008)The work aims at emphasizing the structure changes of graphite gray iron, as a result of make-casting conditions and their effects over behavior in running of several cast items. Researches consisted of complex ... -
Structure-Properties Corelation in Sintered Hard Alloys with High Toughness and Strength
(Universitatea "Dunărea de Jos" din Galați, 2007)The researches effectuated until now in the field of sintered hard alloys based on metallic carbides have the aim to improve them properties through modifications of existing technologies and by creating other news ones, ... -
Structure-Property Correlation of Composite Materials Based on Cu-Mo obtained by PVD Method
(Universitatea "Dunărea de Jos" din Galați, 2013)The paper describes reviews referring to determination of working parameters of the development processes of composites in copper matrix, by vapour-phase deposition method. The molybdenum was used as complementary phase. ... -
Studies About Electrochemical Plating with Zinc-Nickel Alloys
(Universitatea "Dunărea de Jos" din Galați, 2007)The electrochemical deposition of zinc and combinations with elements of the 8th group of the Periodic System (nickel, cobalt, iron) have good properties for anticorrosive protection, compare with pure zinc. For steel ... -
Studies and Research Obtaining Bronze Filters Using Powder Metallurgy Methods
(Universitatea "Dunărea de Jos" din Galați, 2015)The article presents how to obtain porous bronze products using copper - based powder by powder metallurgy methods. The formation of tablets was done by free pouring the spherical powder into the mould, followed by their ... -
Studies and Research on Pipe Networks Water Losses
(Universitatea "Dunărea de Jos" din Galați, 2017)The issue of water losses in pipe networks (transmission mains, conveyance and distribution pipelines) is one of the major problems encountered in water supply systems management. The losses have reached very high values, ... -
Studies and Research on the Production of TiO2 and TiN thin Film by Assisted Physical Vapor Deposition Magnetron Process
(Universitatea "Dunărea de Jos" din Galați, 2017)The experimental research carried out in this paper aims at obtaining thin films of TiO2 and TiN and at characterizing them in terms of morphology, structure, transparency and electrical properties. The films were obtained ... -
Studies and Research on Treatment of Titanium Alloys
(Universitatea "Dunărea de Jos" din Galați, 2014)Titanium and its alloys have an extended use due to special properties. The paper highlights the TiZr alloy intended to manufacture prostheses, the influence of plastic deformation on the properties and structure. Applied ... -
Studies and Researches Regarding the Obtaining and Characterization of Composite Nickel Coatings-Ni/Al2O3, Ni/Kaolin Electrochemically Produced
(Universitatea "Dunărea de Jos" din Galați, 2016)This study presents the composite nickel coatings electrochemically obtained using as disperse phases Al2O3 particles and kaolin. There were used Watts electrolytes, with a pH = 4, current density of 4 A/dm2, a concentration ... -
Studies Concerning Energetic Consumption of Some Heating Equipments with Resistors
(Universitatea "Dunărea de Jos" din Galați, 2007)In order to increase the resistance of aluminium alloys a complex heat treatment is usually performed. Therefore, we must consider the reaction time between aluminium alloys and furnace atmosphera. These atmospheres ... -
Studies on the Effects of Olive Oil Oxidation
(Universitatea "Dunarea de Jos" din Galați, 2013)The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate and the analysis of the transmittance spectra of the oxidized olive oil. Oxidation of olive oil is a process that leads ... -
Studies Regarding Nickel Electrodeposition from Watts bath with Addition of Polyvinylpyrrolidone and Sodium Saccharine
(Universitatea "Dunarea de Jos" din Galați, 2009)This paper is based on some studies about the influence of polyvinylpyrrolidone (PVP) and sodium saccharine as far as concern their influence on the nickel electroplating processes from Watts bath. PVP is a wetting ... -
Studies Regarding the Cooling of the Rolled Pieces With Atomizing Water
(Universitatea "Dunărea de Jos" din Galați, 2006)The diversity of metallurgical materials and processes imposes a large scale of cooling speeds. The classical cooling mediums restrict the scale of the cooling speeds, reason for which nonconventional alternatives were ... -
Studies Regarding the properties Modification of AISI 310S Steel
(Universitatea "Dunărea de Jos" din Galați, 2017)The paper presents an analysis of classical heat treatments, which can be applied to AISI310S steel samples. The influence of these heat treatments was highlighted by micro-hardness measurements – Vickers method, and ...