Căutare Fascicula IX după Titlu
Afișează articolele 418-437 of 552
-
Structure-Property Correlation of Composite Materials Based on Cu-Mo obtained by PVD Method
(Universitatea "Dunărea de Jos" din Galați, 2013)The paper describes reviews referring to determination of working parameters of the development processes of composites in copper matrix, by vapour-phase deposition method. The molybdenum was used as complementary phase. ... -
Studies About Electrochemical Plating with Zinc-Nickel Alloys
(Universitatea "Dunărea de Jos" din Galați, 2007)The electrochemical deposition of zinc and combinations with elements of the 8th group of the Periodic System (nickel, cobalt, iron) have good properties for anticorrosive protection, compare with pure zinc. For steel ... -
Studies and Research Obtaining Bronze Filters Using Powder Metallurgy Methods
(Universitatea "Dunărea de Jos" din Galați, 2015)The article presents how to obtain porous bronze products using copper - based powder by powder metallurgy methods. The formation of tablets was done by free pouring the spherical powder into the mould, followed by their ... -
Studies and Research on Pipe Networks Water Losses
(Universitatea "Dunărea de Jos" din Galați, 2017)The issue of water losses in pipe networks (transmission mains, conveyance and distribution pipelines) is one of the major problems encountered in water supply systems management. The losses have reached very high values, ... -
Studies and Research on the Production of TiO2 and TiN thin Film by Assisted Physical Vapor Deposition Magnetron Process
(Universitatea "Dunărea de Jos" din Galați, 2017)The experimental research carried out in this paper aims at obtaining thin films of TiO2 and TiN and at characterizing them in terms of morphology, structure, transparency and electrical properties. The films were obtained ... -
Studies and Research on Treatment of Titanium Alloys
(Universitatea "Dunărea de Jos" din Galați, 2014)Titanium and its alloys have an extended use due to special properties. The paper highlights the TiZr alloy intended to manufacture prostheses, the influence of plastic deformation on the properties and structure. Applied ... -
Studies and Researches Regarding the Obtaining and Characterization of Composite Nickel Coatings-Ni/Al2O3, Ni/Kaolin Electrochemically Produced
(Universitatea "Dunărea de Jos" din Galați, 2016)This study presents the composite nickel coatings electrochemically obtained using as disperse phases Al2O3 particles and kaolin. There were used Watts electrolytes, with a pH = 4, current density of 4 A/dm2, a concentration ... -
Studies Concerning Energetic Consumption of Some Heating Equipments with Resistors
(Universitatea "Dunărea de Jos" din Galați, 2007)In order to increase the resistance of aluminium alloys a complex heat treatment is usually performed. Therefore, we must consider the reaction time between aluminium alloys and furnace atmosphera. These atmospheres ... -
Studies on the Effects of Olive Oil Oxidation
(Universitatea "Dunarea de Jos" din Galați, 2013)The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate and the analysis of the transmittance spectra of the oxidized olive oil. Oxidation of olive oil is a process that leads ... -
Studies Regarding Nickel Electrodeposition from Watts bath with Addition of Polyvinylpyrrolidone and Sodium Saccharine
(Universitatea "Dunarea de Jos" din Galați, 2009)This paper is based on some studies about the influence of polyvinylpyrrolidone (PVP) and sodium saccharine as far as concern their influence on the nickel electroplating processes from Watts bath. PVP is a wetting ... -
Studies Regarding the Cooling of the Rolled Pieces With Atomizing Water
(Universitatea "Dunărea de Jos" din Galați, 2006)The diversity of metallurgical materials and processes imposes a large scale of cooling speeds. The classical cooling mediums restrict the scale of the cooling speeds, reason for which nonconventional alternatives were ... -
Studies Regarding the properties Modification of AISI 310S Steel
(Universitatea "Dunărea de Jos" din Galați, 2017)The paper presents an analysis of classical heat treatments, which can be applied to AISI310S steel samples. The influence of these heat treatments was highlighted by micro-hardness measurements – Vickers method, and ... -
Study about the Perception of Producers from Romania Regarding the Ecolabel
(Universitatea "Dunărea de Jos" din Galați, 2017)The purpose of this paper is to obtain information about the Romanian producers’ perspective on some key elements regarding the environmental aspects of their company, data on the certification SR EN ISO 14001: 2015 and ... -
Study and Researche Regarding Binaring Sistem with TIOBIS - β – NAFTOL
(Universitatea "Dunărea de Jos" din Galați, 2007)This paper presents the results for contribution of determining the manganese from waters and steel. Manganese, due to its properties, cannot be found but in acid waters and usually associated with iron. In small amounts, ... -
Study for Evaluation and Optimization of Mineral Composition and Structure of Iron Ore Granulation in Sintering Process
(Universitatea "Dunărea de Jos" din Galaţi, 2012)The characterization of iron ore particles is of vital importance for the study of mineral composition. The specific surface area of iron ore particles can be measured by laser diffraction, and mathematical models (based ... -
A study of Electric Properties of Fiber Fabric Based Filled Epoxy Composites
(Universitatea "Dunărea de Jos" din Galați, 2007)Electric and magnetic properties of laminate carbon fiber fabric based epoxy composites are investigated through experimental techniques. Various concentrations of powder fillers were used in order to change the basic ... -
A Study of Electromagnetic properties of Fiber Fabric Based Filled Epoxy Composites
(Universitatea "Dunărea de Jos" din Galați, 2007)Electric and magnetic properties of laminate carbon fiber fabric based epoxy composites are investigated through experimental techniques. Various concentrations of powder fillers were used in order to change the basic ... -
Study of Heat Treatment Influence on Aluminum-Based Alloy ATN-Si10Cu4
(Universitatea "Dunărea de Jos" din Galați, 2007)This work presents the experimental results concerning the behavior on heat treatment of on aluminum based alloy. The laboratory level experiments achieved on samples of ATN-Si10Cu4 (4145 series) alloy illustrate the ... -
Study of Severe Plastic Deformation by Torsion Test
(Universitatea "Dunărea de Jos" din Galaţi, 2008)High Torsion Pressure (HPT) is an advanced tool for inducing very significant grain refinement in a wide range of metals. In this research were studied parameters of severe plastic deformation using the torsion test. The ... -
Study of the Inclusions from the Oriented Grains Silicon Steels and Their Influence on the Texture
(Universitatea "Dunărea de Jos" din Galați, 2006)The paper presents experimental results concerning the inhibitor phases generation by microalloying elements utilization. It was made experiments on three silicon steel charges. It was observed that the inhibitor phases ...
