Fascicula IX: Recent submissions
Afișează articolele 381-400 of 552
-
Improving Slab Quality Through Control of Cooling Parameters in Continuous Casting Plants
(Universitatea "Dunărea de Jos" din Galaţi, 2014)Coupling the continuous casting installations with the rolling ones is a modern process that brings considerable economic benefits. During the continuous casting process of steel slabs, necessary technological conditions ... -
Superficial Hardening with Pulse Laser Applied to ASTM A537 HSLA Steel
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The surface hardening with YAG:Nd pulse laser is used to obtain a set of surfaces with different properties and it is based on the formation of a very fine martensite. The paper has been elaborated based on laboratory ... -
Microstructural Characteristics of Sintered Powder Metallurgy Alloys
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The purpose of this paper is to study the influence of processing parameters on the microstructural characteristics of sintered powder metallurgy alloys. The specimens were produced from atomised iron powders with different ... -
Study on Refractory Material Used Forthe Wear Laver of the Tundish
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The continuous casting of steel is a modern and efficient process for the production of semi-finished products required for the other components of steel industry. In order to improve the quality of continuous cast slebs ... -
Computer Vision System for Detection of Passenger Sleeping state for Advanced Driver Assistance Systems
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The goal of this research is to develop an in-vehicle computerized system able to warn the driver, to assess the passenger’s state of sleeping in order to avoid affecting the driver psychologically and induce drowsiness. ... -
Study on the Rheology of Corn Oil Subjected to Forced Oxidation
(Universitatea "Dunărea de Jos" din Galaţi, 2014)This paper reflects a study on the rheology of corn oil in unoxidized state, subjected to forced oxidation treatment. Using the Rheotest2 system, the variation of dynamic viscosity with temperature and shear rate, using ... -
Characterization of Archaeological Objects Coming from Moldovian Settlements in the XIV Century
(Universitatea "Dunărea de Jos" din Galaţi, 2014)This paper presents the characterization, from the materials science point of view, of an object found in an archaeological vestige of the 14th century. The object studied (an iron nail used in constructions) proves that ... -
Experiments on Ballistic Tests for Improving Performance of a Neutralizing Gas Dynamics System
(Universitatea 'Dunărea de Jos" din Galaţi, 2014)Neutralizing improvised explosive devices (handmade) by mechanical separation of the elements which are part of their composition can be achieved by the following methods: - generation of shock waves by means of the ... -
Evolutionary Perspectives on Energy Consumption of Raw materials to Ensure Energy Production in the EU-28
(Universitatea 'Dunărea de Jos" din Galaţi, 2014)A clear analysis of the electricity production and consumption sector in the EU 28 offers firstly the possibility of knowing the final energy consumption for each segment (industry, households, trade, services and ... -
Fabrication of Ultrafine Low Carbon Metallic Multilayer by Accumulative Roll Bonding
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The effect of grain refinements by Accumulative Roll Bonding (ARB) was investigated on low carbon steel. Optical microscopy (OM) and microhardness tests were used to check the phase changes and hardness before and after ... -
Metal Heating Furnace with Flue Gas Condensation. A Thermoeconomic Analysis
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The heat treating furnaces are one of the largest energy consumers in the manufacturing sector and therefore many techniques to improve their energy efficiency have been developed. One of them focuses on the recovery of ... -
Influence of Cooling Oil on the Surface Quality of the Roller Strip
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The excess of emulsion used in the lamination process leads to the formation of drops which in the annealing process forms spots of burned emulsion. It was also shown to cause formation areas with high carbon concentrations ... -
Research on the Influence of the Complementary Phase Percentange on the Properties of Copper-Based Composites
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The article presents the method to obtain copper matrix composite with Cu- Al-Fe alloy particles as complementary phase. The samples were obtained by powder metallurgy methods using different percentages of complementary ... -
Correlation Between the Properties of Old Slags and the Recycling Solutions
(Universitatea "Dunărea de Jos" din Galaţi, 2014)The blast furnace and basic oxygen furnace route of steel making (from iron ores and coke to steel) or the so called integrated steel production generates simultaneously solid waste products. The slag is predominant, ... -
The Evolution of the Characteristics of Mechanical Resistance for the Nitro-Carburized Treated Steel, After Thermo-Magnetic Treatment
(Universitatea Dunărea de Jos" din Galaţi, 2014)The aim of the research was to study the evolution of the characteristics of mechanical resistance for one type of steel. The material was subjected to the thermo-chemical (nitro-carburized treatment in plasma) treatment ... -
Research on the Work Place Security and Environmental Factors Affected by Lathe Work
(Universitatea "Dunărea de Jos" din Galaţi, 2014)Most work place risks are spatially and temporally determined, so a critical early need is to establish the risk of what (is happening) to whom (which part of the environment is affected), where (location) and when (in ... -
Effect of an a Oxy-SulPhide Inoculant Enhancer on Graphite Parameters in the Mould Inoculated Compacted Graphite Cast Iron
(Universitatea "Dunărea de Jos" din Galaţi, 2014)In compacted/vermicular graphite cast iron production, inoculation is applied to limit the formation of carbides, but usually this treatment also promotes nodular graphite with improved nodularity. The main objective of ... -
Dynamics of Nutrients in Aquatic Ecosystems: The Case Study of Ciric Basin River at Nord of Iași City
(Universitatea "Dunărea de Jos" din Galați, 2014)A 1 year dynamics of two biologically limiting nutrients (N and P) has been carried out in the Ciric basin river at nord of Iasi City. The total nitrogen concentrations varied from 7.55-17.55 mg N/L and total phosphorus ... -
Comparative Characteristics of Martensite and Bainite in Cu-Based SMAs
(Universitatea "Dunărea de Jos" din Galați, 2014)The present work reports the evolution of micro-structure and shape memory behavior in a Cu-15 Zn-6 Al (mass. %) shape memory alloy (SMA), as a function of the applied hot working procedure and of the performed heat ... -
Antimicrobial Activity of Ag:Zno/Chitosan Composites
(Universitatea "Dunărea de Jos" din Galați, 2014)This paper deals with Ag, ZnO and Ag-doped ZnO nanoparticles embedded in chitosan (CS) matrix, prepared by hydrolysis of zinc acetate in isopropanol in the presence of lithium hydroxide (LiOH) in low temperature ...
