Căutare 1993 -2018 după Data publicării

Afișează articolele 201-220 of 552

    • Corrosion of Bronze Art Objects and Methods of Restoration 

      Croitoru, Gheorghe; Rusu, Ion (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper presents a study of the corrosive state of sculptures and art objects made from copper and bronze, the equipment used to detect and study defects and the methods and solutions for restoring the art object ...

    • Behavior of A537 Steel Grade in Carburizing in Fluidized Bed with Endothermic Atmosphere 

      Dobrovici, Sorin; Cazacu, Nelu (Universitatea "Dunărea de Jos" din Galați, 2009)
      Fluidized bed allows one to easily change from the chemical composition of the working atmosphere. The paper is based on experiments of carburizing in fluidized bed with endothermic atmosphere made from gases resulting ...

    • Characterization of Iron and Low Alloy Steel Powders Obtain by Water Atomization 

      Drugescu, Elena; Marin, Mihaela; Silva, Rui (Univerversitatea "Dunărea de Jos" din Galați, 2009)
      Three types of iron and low ally steel powders were investigated to determinate their physical properties and surface morphology by SEM analysis. The powders were obtained by water atomization. The first type of powder ...

    • Making Cast Piece Using Exothermic Head 

      Tudor, Beatrice (Universitatea "Dunărea de Jos' din Galați, 2009)
      In this paper presents a study about cost of part obtained with exothermal heads by replacement of classic heads. This method contributes to conduct solidification of cost pieces, because exothermal heads are forecast ...

    • Morphological Aspects and Corrosion Behaviour of Phenol Formaldehyde/Zn Composite Coatings 

      Ciubotariu, Alina-Crina; Benea, Lidia; Mitoșeriu, Olga; Ponthiaux, Pierre; Wenger, François (Universitatea "Dunărea de Jos" din Galați, 2009)
      The present work has the purpose of studying morphological aspects and corrosion behaviour of pure zinc and composite coatings having zinc as metal matrix and phenol – formaldehyde resin type Novolac (RESITAL 6358/1) ...

    • Study of Zro2/Co-Deposition with Cobalt from Chloride Electrolyte 

      Benea, Lidia; Sorcaru, Florentina Simona (Universitatea "Dunărea de Jos" din Galați, 2009)
      The metal-matrix composites are materials in which the properties of a metallic host material are modified with addition of a second phase (ceramics) by electrodeposition process. The second phase can be hard oxides or ...

    • Researches on the Corrosion Behavior for a Drawing Steel That Went Through Natural Ageing 

      Potecașu, Florentina; Potecașu, octavian; Ioniță, Elena; Ciubotariu, Alina (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper presents the results of a study on the corrosion behaviour of the sheets of drawing steel with 0,04% C gone through natural ageing and run for a period of 112 days from the moment of drawing. The researches ...

    • Optimisation of Refractory Components of Sliding Gate Mechanism for Continuous Casting 

      Munteanu, Viorel (Universitatea "Dunărea de Jos" din Galați, 2009)
      New design techniques have been developed to optimize refractory components of sliding gate mechanism for continuous casting of steel. The overall objective is to increase CC productivity as well as steel quality by using ...

    • On the Corrosion Behavior of Organic Nanocomposite Coatings 

      Gheorghieș, Constantin; Gheorghieș, Livia; Oancea, Constantin; Hagioglu, Petrica (Universitatea "Dunarea de Jos" din Galați, 2009)
      Recently, researches on composite coatings of organic nature with the addition of metallic oxide nanopowders have shown an increasing corrosion resistance of metallic materials. Carbon steel shows an improved behavior ...

    • Development of Blade Design for Small Hawt Adapted for Lower Values of Wind Speed 

      Badea, Nicolae; Cazacu, Nelu (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper aims at studing, theoretically and experimentally, the influence of turbines blade profile on output power, in order to decrease effective domain to smaller wind speed, specific to Galati area. Studies have ...

    • The Mechanism of Phase Transformation to Obtain Zinc-Iron Coatings 

      Radu, Tamara; Balint, Simion; Mitoșeriu, Olga (Universitatea "Dunărea de Jos" din Galați, 2009)
      Important changes in the ratio of constitutive phases take place during heating of galvanized parts due to Zn coating layer changed into Zn-Fe alloy. The work deals with a mathematical correlation between diffusion ...

    • Obtaining and Characterisation of Thermoresistive Pigments 

      Sandu, Andrei Victor; Vasilache, Violeta; Sandu, Ion; Saviuc, Mihaela; Sandu, Ioan Gabriel; Popa, Ioan Marcel (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper describes the obtaining and chemical and physico-structural characterisation of a green thermoresistive pigment. The pigment is made of ZnO dopped with Sb, Bi, Cr, Co and Fe oxides and it is used at mosaics and ...

    • X-Ray Diffraction Analysis at Ultrasonic Welding 

      Dumitrache, Constantin; Bărhălescu, Mihaela; Sabău, Adrian; Comandar, Corneliu (Universitatea "Dunărea de Jos" din Galați, 2009)
      In the article [2] the author present experimental investigations regarding of residual stress distribution in weld bead vicinity of submerged arc welded naval plates. In this way, residual stresses from vicinity of weld ...

    • Time Scales of Phisico-Chemicaly Driven Processes in Desulphurization CaO-Al2O3 Slag 

      Niță, Petre Stelian (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper is dealing with the expression of times scales associated to different physically and physico-chemically driven processes taking place on the slag side of the interface CaO-Al2O3 slags-steel, specific to the ...

    • Generation, Morphology and Mineralogy of the Dust Particles from Off-Gas Blast Furnace 

      Ciocan, Anișoara; Potecașu, Florentina; Ivancea, Liliana (Universitatea "Dunărea de Jos" din Galați, 2009)
      In order to elucidate the morphology and mineralogy of the dust from blast furnace, the fundamental aspects of its generation process were studied. A dust generated by the dry dedusting step of the cleaning process for ...

    • Effects of Plastic Deformation and Temperature on Microstructural and Mechanical Properties of a CuAlNi Shape Memory Alloy 

      Gurău, Carmela; Gurău, Gheorghe (Universitatea "Dunărea de Jos" din Galați, 2009)
      In Cu 12.88% wt.Al4 %wt. Ni shape memory alloy the influence of plastic deformation and thermal treatments on the microstructures and hardness were studied by optical microscopy, scanning electron microscopy (SEM), ...

    • Transparent and Conducting TIN Oxide Thin Films Deposited by Spray Pyrolysis 

      Fortunato, Elvira; Elangovan, Elamurugu; Danciu, Anca-Ionela; Tecaru, Alexandru; Mușat, Viorica (Universitatea "Dunărea de Jos" din Galați, 2009)
      The chemical spray pyrolysis technique has been one of the major techniques to deposit a wide variety of materials in thin film form, for different applications. The most important control parameters for obtaining good ...

    • Software used at Castings Production 

      Marginean, Ioan; Bratu, Constantin; Cocolas, Sorin-Adrian (Universitatea "Dunărea de Jos" din Galați, 2009)
      The foundry industry has been developed worldwide, a number of software that can assist the design work and various processes in the production of castings. Current usage of such software by metallurgical engineers is ...

    • Intercritical Thermomechanical Treatments of the Microalloyed Steel Products for Welded Structures 

      Vasilescu, Elisabeta; Doniga, Ana; Neacșu, Marian (Universitatea "Dunărea de Jos" din Galați, 2009)
      This paper shows the laboratory experiments made on several grade steels by applying some intercritical thermomechanical treatments; Two variants were used: “down-up” thermomechanical treatment with heating and rolling ...

    • Monitoring of the Rolling Mill Vibration 

      Dragomir, Ștefan; Dragomir, Georgeta; Bordei, Marian (Universitatea "Dunărea de Jos" din Galați, 2009)
      These researches show the influence of mill vibration on the thickness profile of the stainless steel sheet. The alloy elements like Ni and Cr inside the stainless steel could amplify the rolling mill vibration and ...