Profilometric Analysis of Worn Surface of Bronze, Iron and Iron Composite Samples, by Pin-on -Disk Method

dc.contributor.author	Iliuță, Virgil
dc.contributor.author	Ciupagea (Coteț), Gabriel Andrei
dc.contributor.author	Rîpă, Minodora
dc.date.accessioned	2018-08-28T11:11:51Z
dc.date.available	2018-08-28T11:11:51Z
dc.date.issued	2013
dc.identifier.issn	1453 – 083X
dc.identifier.uri	http://10.11.10.50/xmlui/handle/123456789/5341
dc.description	The Annals of "Dunarea de Jos" University of Galati Fascicle IX Metallurgy and Materials Science N0. 2 – 2013, ISSN 1453 – 083X	ro_RO
dc.description.abstract	In this study are presented the results of profilometric analysis for the wear of bronze materials, cast iron and composite materials. These materials were tested under dry wear conditions, using "pin-on-disk" method on a UMT-2 tribotester at a room temperature and relative humidity of 30-45%. The tests were carried out with load of 30, 40 and 60N at a linear speed of 0.815 m/s. The resulted traces of wear were examined with a Surtonic 3 + profilometer that has Talyprof software installed on, trademarks of TAYLOR HOBSON (United Kingdom) company. The obtained results allowed for a tribological analysis of the materials and their classification from the tribological point of view.	ro_RO
dc.language.iso	en	ro_RO
dc.publisher	Universitatea "Dunărea de Jos" din Galați	ro_RO
dc.subject	roughness parameters	ro_RO
dc.subject	bronze	ro_RO
dc.subject	gray cast iron	ro_RO
dc.title	Profilometric Analysis of Worn Surface of Bronze, Iron and Iron Composite Samples, by Pin-on -Disk Method	ro_RO
dc.type	Article	ro_RO