Residual Stress and Tribology Behaviour of TiCx Coating Deposited by NPCVD Method

dc.contributor.author	Constantinescu, Stela
dc.date.accessioned	2018-08-13T09:58:44Z
dc.date.available	2018-08-13T09:58:44Z
dc.date.issued	2014
dc.identifier.issn	1453 – 083X
dc.identifier.uri	http://10.11.10.50/xmlui/handle/123456789/5290
dc.description	The Annals of "Dunarea de Jos" University of Galati Fascicle IX Metallurgy and Materials Science N0. 2 – 2014, ISSN 1453 – 083X	ro_RO
dc.description.abstract	In this paper, thin TiCx films were coated by chemical vapour deposition method, and various duty cycles were carried out in order to observe the influence of this parameter on residual stress and tribology behaviours. The duty cycles were 35, 43 and 50% at 500 oC operating temperature. Therefore, wear behaviour, hardness and chemical analyses of TiCx coating were characterised, and it was found that the residual stresses in the coating were compressive, which were- 1.14189 - 0.12985 and -0.1749 MPa at three different duty cycles, i.e. 35, 43 and 50% respectively. According to the results, the coating that was applied at 43% exhibited superior wear resistance and possessed the lowest friction coefficient of ~ 0.059 in a pin-on-disc test.	ro_RO
dc.language.iso	en	ro_RO
dc.publisher	Universitatea "Dunărea de Jos" din Galați	ro_RO
dc.subject	wear	ro_RO
dc.subject	residual stress	ro_RO
dc.subject	TiCx coating	ro_RO
dc.subject	duty cycle	ro_RO
dc.title	Residual Stress and Tribology Behaviour of TiCx Coating Deposited by NPCVD Method	ro_RO
dc.type	Article	ro_RO