Căutare 2009 fascicula9 nr1 după Data publicării
Afișează articolele 1-20 of 33
-
Heavy Metal Ions Cu (II), Co (II) and Cr (III) bufunctionally Improved with Hydroxamic and Amidoxime Groups Chelating Ion Exchangers
(Universitatea "Dunărea de Jos'' din Galați, 2009)Two new types of bifunctional chelating ion exchangers on the basis of ethylacrylate acrylonitrile: divinylbenzene copolymers with hydroxamic acid and amidoxime groups have been evaluated for Cu(II), Co(II) and Cr(III)ions ... -
Improving of Functional Parameters for Pressure Casting Machine with High Degree of Finishing
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents a mathematic model of static and dynamic characteristics for casting machine. This machine has a hydraulic action for the casting chamber (her closing and introducing of molten alloy). This action is ... -
Critical Analysis of "Maximum Stress Failure"
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper deals with critical considerations upon different points of view that were enounced by some authors referring to Maximum Stress Failure Criterion for composite materials. The considerations stem both from a ... -
Study of the Sintering Process of Iron Powders Coated with Nano-Hydrocarbon and the Resulting Microstructure at Temperatures up to 1200°C
(Universitatea "Dunărea de Jos" din Galați, 2009)The objective of the research is development and study of a new ecologically friendly and technologically advanced method for introduction of carbon during sintering of low alloyed iron powders ASC 100.29. The method is ... -
Elements of Drawing Theory and Technology of the High Mechanical Strength Wires in Ultrasonic Field
(Universitatea "Dunărea de Jos" din Galați, 2009)In the paper are presented elements of drawing theory and technology of the high mechanical strength wires, when the auger die is located in the maximum of the waves oscillation and it is activated on drawing direction. ... -
Redesigning a Jaw Crusher Using Value Analysis Part I
(Universitatea "Dunărea de Jos" din Galați, 2009)Value Analysis (VA) is a method that provides an operating technique using a creative and organized approach. It is managed by a group, each of them selected according their expertise in specific subjects and coordinated ... -
Experimental Studies Regarding the Implementation Possibilies of a Quality Control System for Ceramic Products in Continuous Flux Production
(Universitatea "Dunărea de Jos" din Galați, 2009)In the current paper the authors studied the possibilities and limitations of a system intended to evaluate the quality of ceramic products directly on the production line. The system is based on a data mining specific ... -
The Assessing of Mechanical Characteristics of the Steel Sheets Designed for Drawing for a Five-Month-Period as an Effect of Natural Ageing
(Universitatea "Dunărea de Jos" din Galați, 2009)In the paper it is presented a study run on a five-month-period regarding the changes in the mechanical characteristics due to natural ageing for a drawing steel, cold rolled, unalloyed with 0.04% C. The ageing tendency ... -
Researches on the Viscoplastic Behavior of a CrMo Alloyed Steel
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper shows the results of the researches concerning the deformation behavior of alloyed steel with chromium and molybdenum. The plastic deformation behavior is researched in the experimental way, using the torsion ... -
Electrochemical Deposition and SEM Surface morphology of Co and UHMWPE/Co Composite Layers
(Universitatea "Dunărea de Jos" din Galați, 2009)The work aims at obtaining composite coatings in cobalt matrix with dispersed phase UHMWPE (ultra high molecular weight polyethylene) and at characterizing the surface morphology analyse by SEM, the thickness of the ... -
Analytical Methods Helping the Archaeologists: Archaeometry
(Universitatea "Dunărea de Jos" din Galați, 2009)Very important objects of cultural heritage are material objects and objects of art produced by all communities. The physical and mechanical properties of material culture are always of prime concern to archaeometry and ... -
Quality Engineering Procedures Applied to Determine the Weight of Influence of Factors on Microtrigeneration Systems (mCCHP)
(Universitatea "Dunărea de Jos" din Galați, 2009)Microtrigeneration systems are characterized by simultaneous generation of power, heat and cold for small applications (<50kW) and are designed for reducing GHG and other emission degreases. The cooling generation by ... -
A Typical Surface Formations Found on the Corrosion Layer of Iron Artefacts
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents the experimental results obtained by applying non-invasive methods (OM, SEM-EDX, XRF) on two iron artefacts from the IInd and the IIIrd centuries A.D. (discovered in the incineration graves from ... -
Superior Valorisation of the Aluminium Scraps for Obtaining Complex Aluminium Master Alloys Used in Advanced Refining of the Steels
(Universitatea "Dunărea de Jos" din Galați, 2009)The research about aluminium scraps valorisation to obtain master alloys with reactive elements (Al, Mn, Si) used for special steels refining is presented in this paper. By this way the recycling of aluminium scraps leads ... -
Corrosion of Bronze Art Objects and Methods of Restoration
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents a study of the corrosive state of sculptures and art objects made from copper and bronze, the equipment used to detect and study defects and the methods and solutions for restoring the art object ... -
Behavior of A537 Steel Grade in Carburizing in Fluidized Bed with Endothermic Atmosphere
(Universitatea "Dunărea de Jos" din Galați, 2009)Fluidized bed allows one to easily change from the chemical composition of the working atmosphere. The paper is based on experiments of carburizing in fluidized bed with endothermic atmosphere made from gases resulting ... -
Characterization of Iron and Low Alloy Steel Powders Obtain by Water Atomization
(Univerversitatea "Dunărea de Jos" din Galați, 2009)Three types of iron and low ally steel powders were investigated to determinate their physical properties and surface morphology by SEM analysis. The powders were obtained by water atomization. The first type of powder ... -
Making Cast Piece Using Exothermic Head
(Universitatea "Dunărea de Jos' din Galați, 2009)In this paper presents a study about cost of part obtained with exothermal heads by replacement of classic heads. This method contributes to conduct solidification of cost pieces, because exothermal heads are forecast ... -
Physical-Chemical Properties (Cu-Sn) -Mo Composite Materials
(Universitatea "Dunărea de Jos" din Galați, 2009)The article is devoted to the study of corrosive and thermal stability of materials composition on the basis of copper, obtained by the EB-PVD method. It is shown in this work that corrosion of (Cu-Sn)–Mo composites have ... -
Characterization of Thick Hard Layers with ni-Cr-B-Fe-Al Alloy Obtained by Laser Cladding
(Universitatea "Dunărea de Jos" din Galați, 2009)To increase the resistance to wear and corrosion of the surface layers made from steel with 0.45% C, multilayer deposition was tested by injection of powder with chemical composition of 8.9% Cr, 4.5% Fe, 5.1% B, 2, 4% ...