Now showing items 1-20 of 32

    • Experimental Model for Pollutants Monitoring Into the Coke-Chemical Plant 

      Munteanu, Viorel; Vlad, Maria; Balint, Lucica (Universitatea "Dunărea de Jos' din Galați, 2009)
      The Coke-Chemical plants contribute heavily to producing and emitting in the atmosphere a big amount of polluting agents. Polluting emissions diminution and situating them within the international specific standards, ...
    • The Steam-Secondary Source of Energy in Metallurgy 

      Ivănescu, Lilica (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper is focused on a study of how to use the steam from recovery boilers of LD converters to produce electricity in turbine generators and heat in a heat network.
    • Time Scales of Phisico-Chemicaly Driven Processes in Desulphurization CaO-Al2O3 Slag 

      Niță, Petre Stelian (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper is dealing with the expression of times scales associated to different physically and physico-chemically driven processes taking place on the slag side of the interface CaO-Al2O3 slags-steel, specific to the ...
    • Effects of Plastic Deformation and Temperature on Microstructural and Mechanical Properties of a CuAlNi Shape Memory Alloy 

      Gurău, Carmela; Gurău, Gheorghe (Universitatea "Dunărea de Jos" din Galați, 2009)
      In Cu 12.88% wt.Al4 %wt. Ni shape memory alloy the influence of plastic deformation and thermal treatments on the microstructures and hardness were studied by optical microscopy, scanning electron microscopy (SEM), ...
    • Transparent and Conducting TIN Oxide Thin Films Deposited by Spray Pyrolysis 

      Fortunato, Elvira; Elangovan, Elamurugu; Danciu, Anca-Ionela; Tecaru, Alexandru; Mușat, Viorica (Universitatea "Dunărea de Jos" din Galați, 2009)
      The chemical spray pyrolysis technique has been one of the major techniques to deposit a wide variety of materials in thin film form, for different applications. The most important control parameters for obtaining good ...
    • Study of the RV52 Steel Plates Properties After Thermic Treatment 

      Vlad, Maria; Constantinescu, Stela (Universitatea "Dunărea de Jos" din Galați, 2009)
      The thermal treatment of RV52 steel plates determines high mechanical properties such as: strength, wear resistance and tenacity. The normalized plate samples were studied to determine the effect of the tension release ...
    • Software used at Castings Production 

      Marginean, Ioan; Bratu, Constantin; Cocolas, Sorin-Adrian (Universitatea "Dunărea de Jos" din Galați, 2009)
      The foundry industry has been developed worldwide, a number of software that can assist the design work and various processes in the production of castings. Current usage of such software by metallurgical engineers is ...
    • Generation, Morphology and Mineralogy of the Dust Particles from Off-Gas Blast Furnace 

      Ciocan, Anișoara; Potecașu, Florentina; Ivancea, Liliana (Universitatea "Dunărea de Jos" din Galați, 2009)
      In order to elucidate the morphology and mineralogy of the dust from blast furnace, the fundamental aspects of its generation process were studied. A dust generated by the dry dedusting step of the cleaning process for ...
    • Intercritical Thermomechanical Treatments of the Microalloyed Steel Products for Welded Structures 

      Vasilescu, Elisabeta; Doniga, Ana; Neacșu, Marian (Universitatea "Dunărea de Jos" din Galați, 2009)
      This paper shows the laboratory experiments made on several grade steels by applying some intercritical thermomechanical treatments; Two variants were used: “down-up” thermomechanical treatment with heating and rolling ...
    • Monitoring of the Rolling Mill Vibration 

      Dragomir, Ștefan; Dragomir, Georgeta; Bordei, Marian (Universitatea "Dunărea de Jos" din Galați, 2009)
      These researches show the influence of mill vibration on the thickness profile of the stainless steel sheet. The alloy elements like Ni and Cr inside the stainless steel could amplify the rolling mill vibration and ...
    • Behavior of Ni/al2O3 Nanocomposite Thin Layers in Corroding Environment 

      Gheorghieș, c.; Gheorghieș, Livia; Atanasiu, V.O. (Universitatea "Dunărea de Jos" din Galați, 2009)
      This paper investigates the effects of adding alumina nanoparticles in the electrolyte bath on surface topomorphologies and structure of electrodeposited nickel. The influence on the corrosion process in NaCl solutions ...
    • Reseaeches Regarding the Elements Loss Through vaporization During the Elaboration Process LD Converter 

      Ivănescu, Alexandru; Doniga, Ana; Vasilescu, Elisabeta; Ivănescu, Lilica (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper presents a series of researches regarding the vaporization of the component elements of the metallic bath and slag during refining in LD converter. Also, the main factors which influence the vaporization process ...
    • Influence of Ph galvanic Baths on the Nickel Deposits 

      Poroch-Serițan, Maria; Gutt, Gheorghe; Severin, Traian; Bobu, Maria (Universitatea "Dunărea de Jos" din Galați, 2009)
      The influence of pH on cathodic and anodic current efficiency, surface quality and morphology of nickel deposit in the electrolyte solutions of the Watts bath type was investigated. Cathodic current efficiency of nickel ...
    • Waste Minimization by Reuse and Recycling 

      Negoiță, Daniela L.; Ion, Ion V. (Universitatea "Dunărea de Jos" din Galați, 2009)
      Recently, pollution prevention directs attention towards the elimination or reduction of undesired by- products within the production process itself before treatment. On the long term, pollution prevention through waste ...
    • Modelling, Operation and Control of Multiterminal DC Connection for Offshore Wind Farms 

      Drăgan, Mircea Viorel; Drăgan, Cristina Mădălina; Drăgan, Crina Violeta; Hanganu, Doru (Universitatea "Dunarea de Jos" din Galați, 2009)
      Renewable energy systems are tending to become more and more present in the energy market and wind power has already proven its potential. Wind parks of thousands of MW are planned to be place into sea faraway from the ...
    • Alumina Powder Properties Obtained by Neutralization Process of Sodium Aluminate 

      Perušic, Mitar; Mićić, Vladan; Obrenović, Zoran (Universitatea "Dunarea de Jos' din Galați, 2009)
      Today, the most production of alumina is used for aluminum production [1, 2] (metallurgy alumina), minor production of alumina is used for special purpose, as fire-resistant materials, electro porcelain and etc., and ...
    • Mathematical Model Cooling Agglomeration Ferrius in Layer 

      Vasiliu, Adrian (Universitatea "Dunărea de Jos" din Galați, 2009)
      Mathematical model is based on discretization agglomeration areas layer deposited on very small. The τ Δ cooling time and the elements of space and elements xi time relationship is discretization as volume control. Based ...
    • Optimisation of Refractory Components of Sliding Gate Mechanism for Continuous Casting 

      Munteanu, Viorel (Universitatea "Dunărea de Jos" din Galați, 2009)
      New design techniques have been developed to optimize refractory components of sliding gate mechanism for continuous casting of steel. The overall objective is to increase CC productivity as well as steel quality by using ...
    • Development of Blade Design for Small Hawt Adapted for Lower Values of Wind Speed 

      Badea, Nicolae; Cazacu, Nelu (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper aims at studing, theoretically and experimentally, the influence of turbines blade profile on output power, in order to decrease effective domain to smaller wind speed, specific to Galati area. Studies have ...
    • Obtaining and Characterisation of Thermoresistive Pigments 

      Sandu, Andrei Victor; Vasilache, Violeta; Sandu, Ion; Saviuc, Mihaela; Sandu, Ioan Gabriel; Popa, Ioan Marcel (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper describes the obtaining and chemical and physico-structural characterisation of a green thermoresistive pigment. The pigment is made of ZnO dopped with Sb, Bi, Cr, Co and Fe oxides and it is used at mosaics and ...