Căutare 2013 fascicula9 nr3 după Titlu
Afișează articolele 1-15 of 15
-
Characterization of Sintered Hardmetals Coated with Tic
(Universitatea "Dunărea de Jos" din Galaţi, 2013)This paper presents the realization of TiC thin films by CVD method. The thin layers of TiC thicknesses were 8 and 10μm, their thickness increasing with time, keeping the temperature. Diffractometer analysis certifies ... -
Corrosion Behavior of Some Materials in 0.5 M Ammonium hydroxide Solution
(Universitatea "Dunărea de Jos" din Galați, 2013)The present work has the purpose of studying metallographic aspects and corrosion resistance of three materials used in ammonia stripping plants. The corrosion process was evaluated by gravimetric tests and potentiodynamic ... -
Effect of Mean Diameter Size of Disperse Phase on Morphology and Corrosion Resistance of Phenol-Formaldehhyde Resin/Zn Coatings
(Universitatea "Dunărea de Jos" din Galați, 2013)The present work has the purpose of obtaining composite coatings using phenol – formaldehyde (PF) resin electrodeposited with zinc. The phenol – formaldehyde resin/Zn coatings were electrodeposited from a suspension of ... -
Influence of Substrate Temperature on Structural and Morphological Properties of SnO2 Nanostructured thin Films
(Universitatea "Dunărea de Jos" din Galaţi, 2013)SnO2 nanostructures thin films with thickness of 500 nm were prepared by electron beam-physical vapor deposition on glass substrate at temperature of 300, 373, 443, and 583 K. Structural and morphological properties of ... -
Measures to Optimize Job Security "Crane machinists who Transport Liquid Steel"
(Universitatea "dunărea de Jos" din Galați, 2013)The starting point in optimizing the prevention of occupational accidents and occupational diseases for a crane machinist for the transport of liquid steel is the risk assessment of the system. Risk assessment involves ... -
Occupational Risk Management in Industry
(Universitatea "Dunărea de Jos" din Galaţi, 2018)Occupational risk management is part of the occupational health and safety at workplace. Occupational risk management has a specific component relating to the assessment of the risk and a common component of all types ... -
Photocatalytical Activities of Manganese Doped Zinc Oxide Nanoparticles prepared by Sol-gel Method
(Universitatea "Dunărea de Jos" din Galați, 2013)In the last period, ZnO and doped ZnO nanoparticles are intensively investigated for their photocatalytic properties. This paper reports on ZnO and Mndoped ZnO nanoparticles obtained by modified sol-gel method. Were ... -
Premises in the Design of Computational Algorithms for Refining Slags Appied in Ladle Treatment of steels. Influence of Bof Slag and of Other Sources of Slag
(Universitatea "Dunărea de Jos" din Galați, 2013)In the design of computational algorithms for refining slags for ladle treatment of steels, the evaluation of contributions of different factors is a definitory step, allowing to evaluate the real posibilities and ... -
Reasearches Regargindg the Influence of Steam Oxidation on Sintered Alloys Properties
(Universitatea "Dunărea de Jos" din Galaţi, 2013)In this paper is studied the influence of steam treatment applied on sintered steels and the mechanical properties and abrasive wear behavior for two different types of powder. Steam treatment was carried out at temperature ... -
Recycling of Integrated Steel Plant Solid Wastes in the Sintering Process and Corresponding Effects on Pollutant Emissions
(Universitatea "Dunărea de Jos" din Galați, 2013)The new practices in sintering technology allows for the use of a wide range of iron-containing materials in charge with obtaining the agglomerate with necessary characteristics for optimal operation of the blast furnace. ... -
Structure Characterization of Ca/Ba, Ca-FeSi Inoculated, Low Sulphur, Electrically Melted, thin Wall Grey Iron Castings
(Universitatea "Dunărea de Jos" din Galaţi, 2013)Much of the base iron in grey iron foundries is electrically melted in an acid lined induction furnace. The performance of the induction furnace allows superheating above 1500 oC, which is appropriate for thin wall casting ... -
Studies on the Effects of Olive Oil Oxidation
(Universitatea "Dunarea de Jos" din Galați, 2013)The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate and the analysis of the transmittance spectra of the oxidized olive oil. Oxidation of olive oil is a process that leads ... -
The Management of Work Risk for a Plate Rolling mill Machine
(Universitatea "Dunărea de Jos" din Galați, 2013)Arcelor Mittal is the leader on important iron and steel global markets. This company has a performant system for research, for iron and steel plate production and has a top network for distribution, too. The company ... -
Thermomechanical Process Simulation to Predict Processing of Mechanical Properties of Alloys Al-Zn-Mg-Cu
(Universitatea "Dunărea de Jos" din Galați, 2013)This paper presents how to perform simulation (prediction) mechanical properties of aluminum alloys of the system Al-Zn-Mg-Cu. Graphical interface that can predict the mechanical properties studied was performed using ... -
A Two-Step inverse Analysis Approach Used to Identify the Mechanical Properties of Metallic Materials Subjected to Large Plastic Strains. Applications to Local Investigations of Surface Layer's Behaviour
(Universitatea "Dunărea de Jos" din Galați, 2013)The aim of this research work is to improve the experimental and numerical analysis of the local mechanical properties corresponding to metallic alloys used by bulk forming processes. A non-conventional upsetting test ...
