Listar 2007 fascicula9 nr2 por fecha de publicación
Mostrando ítems 1-20 de 28
-
Studies Concerning Energetic Consumption of Some Heating Equipments with Resistors
(Universitatea "Dunărea de Jos" din Galați, 2007)In order to increase the resistance of aluminium alloys a complex heat treatment is usually performed. Therefore, we must consider the reaction time between aluminium alloys and furnace atmosphera. These atmospheres ... -
Behaviour at Nitriding in Fluidized Layer of Austenitic Stainless Steels at the Temperature
(Universitatea "Dunărea de Jos" din Galați, 2007)Nitriding at low temperatures, 450-500oC of austenic stainless steels lead to the obtaining of the tough layers over 1000 HV005 but having thicknesses of tenths of microns. Moreover, nitriding at 500ºC has determined the ... -
Analysis of Steructural Components Exiting in Steel Making Slag Sampled from Steel Making-Continuous casting Flow Sheet
(Universitatea "Dunărea de Jos" din Galați, 2007)Hereby paper work aims to identify and analyze the structural constituents from the steel making shop slag. Therefore, slag specimens sampled from different stages of steel making-continuous casting flow sheet in Mittal ... -
Multifunctional ZnO-Based thin Films by SOL-GEL Method
(Universitatea "Dunărea de Jos" din Galați, 2007)The paper presents the crystalline structure, morphology, optical transmittance, electrical properties and room temperature photoreduction-ozone oxidation properties of some Al-doped ZnO thin films prepared by sol-gel ... -
The Monitoring of Chattering in Cold Rolling Mill System with Stands for Thin Strip
(Universitatea "Dunărea de Jos" din Galați, 2007)Each system (stand – driving) and the continuous rolling line to which it belongs have its own functional and energetically parameters. To reduce any faults of the strip surface it is also necessary to check (eventually ... -
Manufacture of Stud Link Chain Cable Made of Grade U1 and U2 Steel
(Universitatea "Dunărea de Jos" din Galați, 2007)We have analyzed the fabrication technology of the link chain cable made of grade U1 and U2 steel from TREFO S.A. Galati and we had in view during the experiments several rolling programs. The main characteristics of a ... -
Study of the Thermodynamic Regime at the Continuous Casting of Steel
(Universitatea "Dunărea de Jos" din Galați, 2007)The paper presents the evolution of the heat exchange coefficient along the path of the continuous casting unit, as a function of the cooling water flow rate and the path length. The optimization of this thermodynamic ... -
The Action of the Ultrasonic Vibration Over the Diffusion Process in Gases and Liquids
(Universitatea "Dunărea de Jos" din Galați, 2007)Among the new method of studying the properties of the substance and the influence over the most various physical and chemical processes, used in different industrial domains, the main place is occupied by the usage of ... -
Some Aspects About the Refractory Lining Wear in Furnaces
(Universitatea "Dunărea de Jos' din Galați, 2007)For melting cast iron, carbon steel, copper and copper alloys the quartzite is still one of the most used lining material and the most cost effective as well. The silica lining has to be replaced frequently due to the ... -
Basic Mathematical Modeling of the Environmental Processes in the Lower Danube Region [I]
(Universitatea "Dunărea de Jos" din Galați, 2007)In most environmental pollution problems, the pollutant is released to the environment by the, almost always, turbulent flow of a carrier fluid. The pollutant mixes with the surrounding fluid (air or water) and undergoes ... -
Some Results of Researches to Develop the Proper Recycling Methods of Technological Residues from Secondary Aluminum Industry
(Universitatea "Dunărea de Jos" din Galați, 2007)The objective of the research is to identify new suitable process to use residual waste (like aluminium secondary dross, salt slag or fly ashes) in concrete products according with sustainable industry concepts. The paper ... -
Study and Researche Regarding Binaring Sistem with TIOBIS - β – NAFTOL
(Universitatea "Dunărea de Jos" din Galați, 2007)This paper presents the results for contribution of determining the manganese from waters and steel. Manganese, due to its properties, cannot be found but in acid waters and usually associated with iron. In small amounts, ... -
Study of Heat Treatment Influence on Aluminum-Based Alloy ATN-Si10Cu4
(Universitatea "Dunărea de Jos" din Galați, 2007)This work presents the experimental results concerning the behavior on heat treatment of on aluminum based alloy. The laboratory level experiments achieved on samples of ATN-Si10Cu4 (4145 series) alloy illustrate the ... -
Hydrogen production by Steam reforming of Renewable Raw Materials
(Universitatea "Dunărea de Jos" din Galați, 2007)The paper is based on study of steam reforming of renewable raw materials (bioethanol, biomethane) in stainless steel fixed bed reactor. The β-alumina catalysts with nickel has been synthesized and tested supported. The ... -
Improvement of Steel Sheet Corrosion Resistance by Thermic Coverage Method with Zinc-Aluminium Alloys
(Universitatea "Dunărea de Jos" din Galați, 2007)The paper presents the main physico-chemical characteristics (viscosity and superficial tension of zinc-aluminium liquid alloy in view of carry out protected layers on steel sheet with very good properties by thermal ... -
Prediction of Buckling and Postbuckling Behaviour of Composite Ship Panels
(Universitatea "Dunărea de Jos" din Galați, 2007)The behavior of ship plating normally depends on a variety of influential factors, namely geometric/material properties, loading characteristics, initial imperfections, boundary conditions and deterioration arising from ... -
Semi-Planetary Rolling and Changes of Fine Structure and Microstructure
(Universitatea "Dunărea de Jos" din Galați, 2007)The strain intensity in the proximity of planetary cylinder, in the case of semi-planetary rolling is greater than in the proximity of the massive cylinder. This fact leads at the variation of the microstructure and fine ... -
The Influence of Cold Rolling on the Microstructure for Drawing Steels
(Universitatea "Dunărea de Jos" din Galați, 2007)The paper presents the structural changes that appeared in steel for deep drawing, as a result of cold rolling and of recrystallization thermal treatment. The research was conducted on samples taken from the rolled strap, ... -
Study on Some Copper-Molybdenum Based Composite Materials Condensed from the Vapour Phase
(Universitatea "Dunărea de Jos" din Galați, 2007)Design features of equipment are given for realizing high-speed process of electron beam evaporation and condensation. Peculiarities of phase composition and structure of a crystallized pool (melt) on copper base are ... -
Experimental Research Regarding the evolution of Some parameters of the Superficial Layer in love Cycle Fatigue Process
(Universitatea "Dunărea de Jos" din Galați, 2007)The development of some mechanic engineering systems in, feasible to pressure vessels, aeronautics, ship building technology, requires a full investigation of the material features that are to be examined under a low ...
