Căutare Scientific papers - Annals of "Dunarea de Jos" University of Galati - Analele științifice ale Universității "Dunărea de Jos" din Galați după Titlu
Afișează articolele 761-780 of 1845
-
Influence of Micro Glass Beads Added in PBT Matrix on the Mechanical Properties of Composites
(Universitatea "Dunărea de Jos" din Galaţi, 2012)This paper presents the influence of adding materials (micros glass spheres) in a matrix of PBT on several mechanical properties: elasticity modulus, stress at break , elongation at break, energy at break. The mechanical ... -
Influence of Niobium as Microalloying element in 3%Si Steel grade for Electrical Industry
(Universitatea "Dunărea de Jos" din Galaţi, 2012)The paper presents the results of the laboratory research on the chemical composition and crystallographic texture in 3% Si steels and their influence on the level of magnetic losses in the final sheet. The magnetic ... -
The Influence of Non-Homogenous Dielectric Material in the Waveguide Propagation Modes
("Dunarea de Jos" University of Galati, 2006)The aim of this paper is to indicate the equations of electromagnetic wave in homogenous and non-homogenous dielectric material, estabilising the bundary conditions and solves by FEM the equations of the electromagnetic ... -
Influence of Normale Loads on Corrosion Behaviour of Ti-6Al-4V Alloy During Fretting in Artificial Saliva
(Universal "Dunărea de Jos" din Galați, 2012)The fretting corrosion behaviour of untreated Ti-6Al-4V alloy in artificial saliva solution was evaluated based on the change in open circuit potential (OCP) measured as a function of time. Fretting corrosion experiments ... -
Influence of Ph galvanic Baths on the Nickel Deposits
(Universitatea "Dunărea de Jos" din Galați, 2009)The influence of pH on cathodic and anodic current efficiency, surface quality and morphology of nickel deposit in the electrolyte solutions of the Watts bath type was investigated. Cathodic current efficiency of nickel ... -
Influence of reduction scheme on hardness cold rolled strip mark steel ST 12
(Universitatea "Dunărea de Jos" din Galaţi, 2016)The paper presents the results of the research on the influence of the evolution hardness scheme rolled steel, for the cold-rolled strip steel St 12. St 12 is intended for the manufacture of cold rolled strip stamping ... -
Influence of Secondary Refining Treatments on the Quality of High-Grade Steel Used in Oil and Gas Industry
(Universitatea "Dunărea de Jos" din Galați, 2015)Steel is the most important alloy used in oil and gas industry from production and processing to the distribution of refined products. In this research is analyzed the production technology of steel intended for long ... -
Influence of Shear Stability on Oils Behaviour
(Universitatea ”Dunărea de Jos” din Galați, 2008)The paper presents a method to establish a link between the shear stability index and service behaviour of motor oils. A standardized method for shearing stability establishing is combined with appropriated curve fitting ... -
Influence of Sintering Temperature on the Structure of Yttrium Based Phosphor Nanoparticles
(Universitatea "Dunărea de Jos" din Galați, 2017)Yttrium-based phosphor materials belonging to the class known as garnets have witnessed a strong return with the development of the first white LEDs. Among these materials, yttrium aluminum garnet doped with cerium has ... -
Influence of Sliding Speed and Average Pressure in Dry Regim Upon Wear of Composite with PA and Micro Glass Spheres
(Universitatea ”Dunărea de Jos” din Galați, 2009)The papers presents the wear results of testing a set of composites PA + 1% black carbon + x% micro glass spheres, where x is the micro glass sphere concentration (x=0, 5, 10, 20, 30wt) using a pin-on-disc tribotester, for ... -
Influence of Some Technological Parametersof Fluidized Bed Carbonitriding on the Surface Hardness of Carbonitrided Parts from Low Allow Steels
(Universitatea "Dunărea de Jos" din Galați, 2016)The paper describes the experimental research of thermos-chemical treatment of carbonitriding performed on samples of different brands of low alloy steels. The technological parameters whose influence on the carbonitrided ... -
Influence of Steel Modification Allied with 4-7%Si on Macrostructure
(Universitatea "Dunărea de Jos" din Galați, 2006)The goal of this paper is to test the effect of odification process of liquid steel with 4-7% silicon content, in the course of pouring out from steel-smelting furnace into ladlet, on macrostructure. The research settled ... -
Influence of Substrate Temperature on Structural and Morphological Properties of SnO2 Nanostructured thin Films
(Universitatea "Dunărea de Jos" din Galaţi, 2013)SnO2 nanostructures thin films with thickness of 500 nm were prepared by electron beam-physical vapor deposition on glass substrate at temperature of 300, 373, 443, and 583 K. Structural and morphological properties of ... -
Influence of Technological Parameters on the Evolution of Nickel Films Deposited by Electrolysis
(Universitatea "Dunărea de Jos"din Galați, 2009)The influence of technological parameters on the structure of nickel layers electrodeposited on a copper substrate in a Watts bath has been studied. The complex influence of current densities, temperature and pH values ... -
Influence of the Anodic Oxidation Treatment on the Corrosion Behaviour of Aluminium and Aluminium Alloyss
(Universitatea "Dunărea de Jos" din Galați, 2015)This paper deals with the effect of anodic oxidation treatment on the corrosion behaviour of 6061 aluminium alloy in natural sea water. Anodic oxidation treatment leads to the formation of an amorphous oxide layer on the ... -
Influence of the Behavior of Nonlinear viscoelastic Systems Bearing on the Dynamic of Bridge Structures
(Unioversitatea "Dunărea de Jos' dibn Galati, 2011)Modern structures of bridges and viaducts require dynamic isolation systems, designed to eliminate or mitigate the destructive effects of intense traffic and seismic activity on these constructions. This paper studies ... -
Influence of the Chemical Composition on the Behavior of Austenitic Stainless Steel in Fliid Layer Nitriding Process
(Universitatea "Dunărea de Jos" din Galaţi, 2008)The main factors that influence the stainless steel behavior to the nitriding process are: chemical composition, nitriding temperature, treatment time. Researches have revealed that, with low temperature nitriding, the ... -
The Influence of the Economic Crisis on EU Financial Regulations Changes
(Editura Europlus Galaţi, 2011-01) -
The Influence of the Economic Growth Process on Romanian Employment
(Europlus Galati, 2012-03)The aim of this paper is to analyse the influence of the economic growth process on the Romanian employment, in the 1990-2010 period. The results of this study highlight, on the one hand, the existence of a negative ... -
Influence of the Furnace Temperature in Continuous Flux quenching on the Characteristics of Low Carbin Steel Straps
(Universitatea "Dunărea de Jos" din Galați, 2007)In this paper there are presented mechanical characteristics (resiliency, elongation) and structural characteristics resulted from quenching thermal treatment made on an experimental installation, in continuous flux, on ...
