Afișează articolele 41-60 of 552

    • Study of Zro2/Co-Deposition with Cobalt from Chloride Electrolyte 

      Benea, Lidia; Sorcaru, Florentina Simona (Universitatea "Dunărea de Jos" din Galați, 2009)
      The metal-matrix composites are materials in which the properties of a metallic host material are modified with addition of a second phase (ceramics) by electrodeposition process. The second phase can be hard oxides or ...
    • Researches on the Corrosion Behavior for a Drawing Steel That Went Through Natural Ageing 

      Potecașu, Florentina; Potecașu, octavian; Ioniță, Elena; Ciubotariu, Alina (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper presents the results of a study on the corrosion behaviour of the sheets of drawing steel with 0,04% C gone through natural ageing and run for a period of 112 days from the moment of drawing. The researches ...
    • On the Corrosion Behavior of Organic Nanocomposite Coatings 

      Gheorghieș, Constantin; Gheorghieș, Livia; Oancea, Constantin; Hagioglu, Petrica (Universitatea "Dunarea de Jos" din Galați, 2009)
      Recently, researches on composite coatings of organic nature with the addition of metallic oxide nanopowders have shown an increasing corrosion resistance of metallic materials. Carbon steel shows an improved behavior ...
    • Morphological Aspects and Corrosion Behaviour of Phenol Formaldehyde/Zn Composite Coatings 

      Ciubotariu, Alina-Crina; Benea, Lidia; Mitoșeriu, Olga; Ponthiaux, Pierre; Wenger, François (Universitatea "Dunărea de Jos" din Galați, 2009)
      The present work has the purpose of studying morphological aspects and corrosion behaviour of pure zinc and composite coatings having zinc as metal matrix and phenol – formaldehyde resin type Novolac (RESITAL 6358/1) ...
    • X-Ray Diffraction Analysis at Ultrasonic Welding 

      Dumitrache, Constantin; Bărhălescu, Mihaela; Sabău, Adrian; Comandar, Corneliu (Universitatea "Dunărea de Jos" din Galați, 2009)
      In the article [2] the author present experimental investigations regarding of residual stress distribution in weld bead vicinity of submerged arc welded naval plates. In this way, residual stresses from vicinity of weld ...
    • The Mechanism of Phase Transformation to Obtain Zinc-Iron Coatings 

      Radu, Tamara; Balint, Simion; Mitoșeriu, Olga (Universitatea "Dunărea de Jos" din Galați, 2009)
      Important changes in the ratio of constitutive phases take place during heating of galvanized parts due to Zn coating layer changed into Zn-Fe alloy. The work deals with a mathematical correlation between diffusion ...
    • Influence of Technological Parameters on the Evolution of Nickel Films Deposited by Electrolysis 

      Poroch-Serițan, Maria; Gutt, Gheorghe; Bobu, Maria; Severin, Traian; Stroe, Silviu; Mihoc, Carmen (Universitatea "Dunărea de Jos"din Galați, 2009)
      The influence of technological parameters on the structure of nickel layers electrodeposited on a copper substrate in a Watts bath has been studied. The complex influence of current densities, temperature and pH values ...
    • Rapid Synthesisof ZnO Micro and Nanostructures 

      Plăiașu, Adriana Gabriela; Abrudeanu, Mărioara (Universitatea "Dunărea de Jos" din Galați, 2009)
      This paper focuses on the newer chemical synthesis of zinc oxide powders and the effects of reaction temperature and possible mechanism of ZnO formation. The study of the reaction mechanism at different temperatures has ...
    • Preliminary Investigations Concerning Monitoring of Water Pollution Level 

      Cosor (Rusu), Daniela Ecaterina; Munteanu, Viorel; Gheoghieș, Constantin (Universitatea "Dunărea de Jos" din Galați, 2009)
      The aim of this paper is to develop an effective tool based on artificial intelligence techniques for monitoring and characterization of surface waters. Monitoring of the pollution in the aquatic environment consists in ...
    • Severe Plastic Deformed Pure Aluminum by Equal Channel Angular Pressing 

      Gurău, Gheorghe; Gurău, Carmela; Tănase, Dinel (Universitatea "Dunărea de Jos" din Galați, 2009)
      Samples of an aluminum alloy were subjected to an equal channel angular pressing (ECAP) at room temperature for one pass. For the several specimens severe plastic deformation process was interrupted to observe the material ...
    • Study on the Influence of the Chemical Composition in the Thermomechanical Processing of the Steel 

      Vasilescu, Elisabeta; Vasilescu, Ioan; Doniga, Ana; Neacșu, Marian (Univesitatea "Dunărea de Jos" din Galați, 2009)
      This paper presents the results of industrial scale researches on the influence of the chemical composition on the characteristics of high yield point plates of wieldable fine grain steels. The comparative study of the ...
    • Superior Valorisation of the Aluminium Scraps for Obtaining Complex Aluminium Master Alloys Used in Advanced Refining of the Steels 

      Ciocan, Anișoara (Universitatea "Dunărea de Jos" din Galați, 2009)
      The research about aluminium scraps valorisation to obtain master alloys with reactive elements (Al, Mn, Si) used for special steels refining is presented in this paper. By this way the recycling of aluminium scraps leads ...
    • Corrosion of Bronze Art Objects and Methods of Restoration 

      Croitoru, Gheorghe; Rusu, Ion (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper presents a study of the corrosive state of sculptures and art objects made from copper and bronze, the equipment used to detect and study defects and the methods and solutions for restoring the art object ...
    • Making Cast Piece Using Exothermic Head 

      Tudor, Beatrice (Universitatea "Dunărea de Jos' din Galați, 2009)
      In this paper presents a study about cost of part obtained with exothermal heads by replacement of classic heads. This method contributes to conduct solidification of cost pieces, because exothermal heads are forecast ...
    • Characterization of Iron and Low Alloy Steel Powders Obtain by Water Atomization 

      Drugescu, Elena; Marin, Mihaela; Silva, Rui (Univerversitatea "Dunărea de Jos" din Galați, 2009)
      Three types of iron and low ally steel powders were investigated to determinate their physical properties and surface morphology by SEM analysis. The powders were obtained by water atomization. The first type of powder ...
    • Behavior of A537 Steel Grade in Carburizing in Fluidized Bed with Endothermic Atmosphere 

      Dobrovici, Sorin; Cazacu, Nelu (Universitatea "Dunărea de Jos" din Galați, 2009)
      Fluidized bed allows one to easily change from the chemical composition of the working atmosphere. The paper is based on experiments of carburizing in fluidized bed with endothermic atmosphere made from gases resulting ...
    • Quality Engineering Procedures Applied to Determine the Weight of Influence of Factors on Microtrigeneration Systems (mCCHP) 

      Cazacu, Nelu; Badea, Nicolae; Dobrovici, Sorin (Universitatea "Dunărea de Jos" din Galați, 2009)
      Microtrigeneration systems are characterized by simultaneous generation of power, heat and cold for small applications (<50kW) and are designed for reducing GHG and other emission degreases. The cooling generation by ...
    • A Typical Surface Formations Found on the Corrosion Layer of Iron Artefacts 

      Mircea, Otilia; Sandu, Ion; Sârghie, Ioan; Sandu, Andrei Victor (Universitatea "Dunărea de Jos" din Galați, 2009)
      The paper presents the experimental results obtained by applying non-invasive methods (OM, SEM-EDX, XRF) on two iron artefacts from the IInd and the IIIrd centuries A.D. (discovered in the incineration graves from ...
    • Analytical Methods Helping the Archaeologists: Archaeometry 

      Dumitriu, Irina; Fierascu, Radu Claudiu; Ion, Rodica Mariana (Universitatea "Dunărea de Jos" din Galați, 2009)
      Very important objects of cultural heritage are material objects and objects of art produced by all communities. The physical and mechanical properties of material culture are always of prime concern to archaeometry and ...
    • Electrochemical Deposition and SEM Surface morphology of Co and UHMWPE/Co Composite Layers 

      Benea, Lidia; Mardare-Pralea, Marilena; Cojocaru, Paula (Universitatea "Dunărea de Jos" din Galați, 2009)
      The work aims at obtaining composite coatings in cobalt matrix with dispersed phase UHMWPE (ultra high molecular weight polyethylene) and at characterizing the surface morphology analyse by SEM, the thickness of the ...